FAQ

Concrete that is poured, molded, and dried right on the construction site as opposed to being pre-cast and then transported is referred to as cast-in-place concrete, or in-situ concrete.

This technique works well for walls, slabs, foundations, and other structural components that need to blend in perfectly with the architecture of the structure because it can accommodate bespoke sizes and shapes.

Concrete is not waterproof by nature because despite being dense, the material is porous, which allows some water to get through. However, concrete can be made waterproof by using water-reducing admixtures, waterproofing additives, or adjusting the mix design to reduce porosity. Surface treatments like sealants, membranes, and penetrating sealers provide additional protection.

Concrete typically takes about 24 to 48 hours to dry enough to be walked on and about a week to partially cure, reaching roughly 70% of its strength. However, concrete doesn’t fully cure or reach its maximum strength until around 28 days after pouring.

Concrete is a construction material that is created by combining cement, water, and aggregates (such crushed stone, gravel, or sand). These components are mixed to create a paste that becomes strong and durable over time, suitable for a range of structural and architectural uses, such as building foundations, highways, bridges, and structures.

Cement is a fine powder used as a binder in concrete, while concrete is a composite material made from cement, water, and aggregates like sand and gravel. Cement hardens when mixed with water, but concrete combines all ingredients to form a durable construction material used in various structures.

Concrete is composed of cement, which acts as a binder, mixed with water to activate the cement. Aggregates, including coarse materials like gravel and fine materials like sand, provide bulk and strength. Optional admixtures can be added to modify the concrete’s properties, such as its setting time and durability.